7
Introduction
Thank you for choosing this highly specialized yet versatile
product. To safely operate and y your radio controlled
models using the VBar Control, you must read and follow
this device manual carefully. For software and model set-
up, see the quick start guides and manuals provided with
this radio, as well as documentation provided with the nec-
essary components, such as motor, electronic speed con-
troller, servos, the helicopter kit itself. For latest informa-
tion, new features and updates, visit our product web site
www.vstabi.info.
VBar Control and the VBar Control accessories are devel-
oped and manufactured in Germany. They are state-of-
the-art products following highest quality and safety re-
quirements. Every device has been inspected thoroughly
during manufacturing and initial programming. VBar Con-
trol meets European requirements (ETSI) as well as
US-American requirements of the Federal Communica-
tions Commission (FCC). VBar Control has been ight-test-
ed thoroughly. Highest standards with regard to high noise
immunity and operational reliability have been applied.
☝ Attention Unforeseeable changes in manufacturing pro-
cesses and software development make this manual sub-
ject to change without notice. Mikado Model Helicopters
strongly recommends that you visit the product web site
www.vstabi.info regularly to get the latest information re-
garding your VBar Control transmitter.
☝ Attention Mikado Model Helicopters strongly recommends
connecting the VBar Control transmitter to a personal com-
puter at least every six months, and make a connection to
the internet using VBar Control Manager to get the latest
updates automatically.
☝ Attention We provide general information and video tutori-
als on our support web site www.vstabi.info/VBar_Control.
☝ Attention For service and support regarding programming
and operation of your VBar Control and other Mikado prod-
ucts, please contact your local dealer or visit our product
web site www.vstabi.info and the technical support forum
there.
Telephone and e-mail support are available through
Mikado Model Helicopters GmbH
Friedrich-Klausing-Str. 2
14469 Potsdam
Germany
phone +49 331 23749-0
info@mikado-heli.de
www.mikado-heli.de
VBar Control is an advanced multi-function FHSS radio
control system for model helicopters. With it’s unique con-
cept of programming and operation, it is the ideal compan-
ion to go with your radio-controlled and VBar-equipped
models.
VBar Control is designated for use with model helicopters
(and in the future also for use with model airplanes). VBar
Control is not designated for any other purpose than re-
mote control of models for recreation or hobby.
Outside of the country of manufacture, VBar Control has to
be approved by the laws applicable in the country of im-
port, especially regarding emission of radio frequencies.
On every re-export, VBar Control may be subject to regu-
lations. Prior to use, approval of the relevant authorities
may be required. If in doubt, contact your dealer to ensure
that all regulations applicable have been met. VBar Control
must not be used to control other than unmanned radio-con-
trolled models on line of sight.
Mikado Model Helicopters takes no responsibility for any
modication or replacement of parts on VBar Control. Any
modication other than described in the product documen-
tation may render the warranty void.
☝ Attention Problems and physical damage or physical inju-
ry may occur if not followed carefully.
⚠ Warning Dangerous conditions may occur, causing seri-
ous physical injury or death, or massive physical damage,
if not followed carefully.
☠ Danger Dangerous conditions may occur, causing death,
serious physical injury or high physical damage if not fol-
lowed carefully.
☒ Procedures and actions that are prohibited.
☑ Procedures or actions that are mandatory.
To Next Page
Loading...
Need help?
General
