Miller Continuum - SECTION 4 - SPECIFICATIONS; 4-1. Serial Number And Rating Label Location; 4-2. Specifications; 4-3. Environmental Specifications

OM-266409 Page 12
SECTION 4 − SPECIFICATIONS
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Specifications
Input Power
Welding Power
Source Type
Wire Feed Speed Range* Wire Diameter Range
Welding Circui
t
Rating
Overall
Dimensions
Weight
50 VDC Continuum Series Standard:
50−1000 ipm
(1.27−25.4mpm)
.035 To .5/64 in.
(0.9 To 22 mm)
Max Spool Capacity:
18 in. (457 mm)
Max Spool Weight:
60 lb (27 kg)
75 Volts
500 Amperes,
100% Duty
Cycle
Height:
13-13/16 in.
(351 mm)
Width:
17 in.
(432 mm)
Length:
29-11/16 in.
(754 mm)
61.5 lb
(27.9 kg)
*See Section 4-4 for detailed information on wire type, wire size, and wire feed speed.
4-3. Environmental Specifications
A. IP Rating
IP Rating
IP21S
This equipment is designed for indoor use and is not intended to be used or stored outside.
IP21S 2014−06
B. Temperature Specifications
Operating Temperature Range Storage Temperature Range
14 to 104 °F (−10 to 40°C) −4 to 131 °F (−20 to 55°C)
Temp_2016-07
4-4. Wire Type, Size, And Wire Feed Speed Table
Wire Size .035 .045 .052 .062 5/64
Solid Steel
MIG:
50 To 1000 ipm
Accupulse:
75 To 1000 ipm
MIG:
50 To 1000 ipm
Accupulse:
50 To 1000 ipm
MIG:
50 To 800 ipm
Accupulse:
50 To 800 ipm
MIG:
50 To 600 ipm
Accupulse:
50 To 600 ipm
N/A
Metalcore Steel N/A
MIG:
50 To 1000 ipm
Accupulse:
50 To 800 ipm
MIG:
50 To 900 ipm
Accupulse:
50 To 700 ipm
MIG:
50 To 700 ipm
Accupulse:
50 To 600 ipm
N/A
Flux cored Steel N/A
MIG:
200 To 900 ipm
MIG:
200 To 900 ipm
MIG:
150 To 800 ipm
MIG:
100 To 400 ipm