OM-266409 Page 33
SECTION 6 − MAINTENANCE & TROUBLESHOOTING
6-1. Routine Maintenance
! Disconnect power
before maintaining.
. Maintain more often
during severe conditions.
n = Check Z = Change ~ = Clean l = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
3
Months
l Unreadable Labels ~ Weld Terminals nl Weld Cables nl Gun Cables
nl Cords nl Cracked Parts ~ Weld Connections n Tighten Weld Cable
Connections
l Damaged Gas Hose
Every
6
Months
OR
~ Drive Rolls ~ Inside Unit
To Next Page
Loading...
