MIMAC SUPREMA PLUS - 5. Start-Up and Operation Checks (Continued); Preliminary Operations: Roller Dosing Unit Installation

20
www.mimac.com
5.4. PRELIMINARY OPERATIONS
5.4.1. INSERTING THE ROLLER TYPE DOSING UNIT
1. Lay the head on the supporting rods
2. Delicately insert the two rollers
3. Carefully push the dosing group towards the
structure, aligning the motor roller with the relative
coupling
4. Insert the upper section of the head supports
5. Insert the hopper and fasten it using the relative stop
nuts
6. Close the hopper guard