MIMAC SUPREMA PLUS - 5. Start-Up and Operation Checks (Continued); Preliminary Operations: Pump Dosing Unit Installation

USE AND MAINTENANCE MANUAL
21
5.4.2. INSERTING THE PUMP TYPE DOSING UNIT
1. Lay the head on the supporting rods
2. Delicately insert the two rollers into the cavity
3. Position the front cap and fasten it using the relative
stop nuts
4. Carefully push the dosing group towards the
structure, aligning the motor roller with the relative
coupling
5. Insert the hopper and fasten it using the relative stop
nuts
6. Close the hopper guard