MIMAC SUPREMA PLUS - 5. Start-Up and Operation Checks (Continued); Safety Device Checks (Suprema)

26
www.mimac.com
5.5. CHECKING THE SAFETY DEVICES
5.5.1. SUPREMA / SUPREMA PLUS
Always check the safety devices before using the machine:
1. press the emergency stop push-button on the control panel (part 1);
2. activate the safety micro-switches by lifting the mobile guards of the machine (part 2 and part 3);
3. interrupt the safety photocell beam by placing a solid object between it and the reflector in front of it (part 4).
Each of the listed tests must make all the machine movements stop, with the machine entering an emergency state;
when in this condition the machine must be reset to start operating normally again.
If this is not the case, immediately inform the Safety Manager.
2
1
3
4