2. PRELIMINARY INFORMATION
2.1. MANUFACTURER DETAILS
MIMAC ITALIA S.R.L.
Via dell'Industria, 22
36013 Piovene Rocchette (VI)
ITALIA
Tel.: +39 0445 576250
Fax: +39 0445 576112
E-mail: info@mimac.com
2.2. CUSTOMER SERVICE
Machine assistance is supplied by the Manufacturer or the authorized Retailer.
Please contact the Manufacturer or the authorized Retailer for any request and refer to the indications printed on the
information plate of the machine.
2.3. EC STANDARDS COMPLIANCE DECLARATION
The machine indicated in the manual is manufactured in compliance with the relevant Community Directives that
were in force when the machine was placed on the market. As the machine is not included in Annex IV of the
2006/42/EC Machinery Directive, the Manufacturer has supplied self-certification for placing the “EC” marking
according to the reference directives.
2.4. NORMATIVE REFERENCES
Machinery Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/E
UNI EN ISO 12100:2010 - Safety of machinery - General principles for design - Risk assessment and risk
reduction.
UNI EN ISO 13850:2008 - Safety of machinery - Emergency stop - Principles of design.
UNI EN 1088:2008 - Safety of machinery - Interlocking devices associated with guards - Principles for
design and selection.
CEI EN 60204-1 - Safety of machinery. “Electrical equipment of machines”.
Regulation (CE) N. 1935/2004 of 27 October 2004
2.5. GUARANTEE
The machine is guaranteed for 12 months. The guarantee only covers those parts that present production faults and
excludes the electric installation and the motors. The indicated period is valid for a machine that works eight hours a
day and must be halved for heavier-duty conditions.
During the guarantee period the Manufacturer shall supply, free of charge, within the minimum technical periods,
and ex factory, the parts or items that have evident manufacturing faults, and only under the condition that the
machine was used following the regulations established by the Manufacturer (installation, use, maintenance and
performance limits).
Items not manufactured by MIMAC ITALIA are excluded from the guarantee, for example motors and electrical
apparatus, cylinders and pneumatic components, as well as all material not directly guaranteed by its own
manufacturer. In addition, all parts damaged during the transport, or because of bad and/or incorrect installation or
maintenance, or because of neglect or incorrect use, are not covered by the guarantee.
If the faulty parts are repaired or replaced in the premises of the customer, he will be charged with the cost of
travelling, board and lodging and of the working hours of the technicians sent to repair or replace the parts. The
hourly cost shall be quantified according to the Anima (Federation of the Italian Association of Mechanical and
Engineering Industries) tables in force at the moment of the intervention.
If in the unquestionable opinion of our technicians it is not possible to intervene in the customer’s premises, the
customer shall send the machine on DDP terms to MIMAC ITALIA who, after repairing the faulty part at no charge,
shall return the machine on ex works terms.
When the previously indicated guarantee period has expired, the customer will be also charged with both the cost of
the replaced parts and the cost of the labour.
The guarantee is valid only for the original purchaser; machine replacement is never foreseen.
The guarantee becomes null and void when the machine has been tampered with, or modified and/or repaired by
people who have not been expressly authorized by MIMAC ITALIA.
2.6. SOFTWARE OWNERSHIP
The implemented software, which runs machine operations, belongs to MIMAC ITALIA SRL having its legal head
office in Via dell'Industria, 22 - Piovene Rocchette (VI) - ITALY.
The Customer is licensed to use the software in compliance with the instructions in this manual.
To Next Page
Loading...
