MIMAC SUPREMA PLUS - 8. Cleaning Procedures (Continued); Pump Type Dosing Unit Cleaning (Continued)

USE AND MAINTENANCE MANUAL
57
8.5. PUMP TYPE DOSING UNIT DISASSEMBLING AND CLEANING
1. Remove the front guard after removing the blocking nuts.
2. Lift the hopper guard.
3. Slightly withdraw the dosing unit.
4. Lift and remove the hopper after removing the locking nuts.
5. Loosen the locking nuts, remove the front cover of the cavity of the rollers and remove the gasket
6. Delicately remove both rollers.
7. Remove the head from the machine.
8. Remove the back cover of the cavity of the rollers after removing the fixing screws and remove the gasket.
8. Carefully wash all components using hot water.
9. Before reassembling the dosing unit, dry all parts and wait for them to cool down.