MIMAC SUPREMA PLUS - 1. Introduction to the Manual; Manual Information; Symbolism; Importance and Audience

USE AND MAINTENANCE MANUAL
5
1. INTRODUCTION
1.1. OWNERSHIP OF THE MANUAL
This manual belongs exclusively to MIMAC ITALIA SRL.
Reproduction, even partial, is forbidden unless authorized by the Manufacturer.
1.2. PURPOSE OF THE MANUAL
The aim of this manual is to provide information necessary for the correct and safe use of the machine and for
carrying out operation as contemplated in the design phase.
1.3. VALIDITY OF THE MANUAL
This manual reflects the machine state of the art at the time it is placed on the market.
The Manufacturer reserves the right to make changes to the machine at any time and without notice.
Any integration sent by the Manufacturer to users must be kept together with the manual and becomes an integral
part of it.
1.4. SYMBOLISM
Useful information
Important communications regarding safety and caution when carrying out operations
Presence of risks and danger for health and safety
DPI use abligation
Notice regarding machine disposal and packaging elimination
1.5. IMPORTANCE OF THE MANUAL
This manual must be read before starting any operation. Good machine operation is guaranteed if all instructions
contained in this manual are applied correctly.
The machine must not be used and no intervention must be carried out on it before having read this manual
carefully and understood all its content.
It is also forbidden to use the machine for purposes other than those indicated, or to neglect operations that are
necessary for safety.
1.6. INTENDED AUDIENCE
 Accident prevention and safety manager
 Operators in charge of transporting the machine
 Operators in charge of connection to the power source
 Operators in charge of testing the machine
 Operators in charge of the training
 Machine operators
 Operators in charge of maintenance
 Operators in charge of machine disposal
1.7. PRESERVATION OF THE MANUAL
The manual must be kept in good condition and in a suitable place that is known to all machine users.
If the manual is lost, deteriorated or if additional copies are necessary, please contact the Manufacturer directly.
The manual must be kept until the machine is disposed of.
If the machine is sold, the manual must be delivered to the new owner together with the EC standards conformity
declaration and all other attachments.