MIMAC SUPREMA PLUS - 7. Setup and Diagnosis (Continued); Table Overtravel Alarm Reset Instructions

USE AND MAINTENANCE MANUAL
53
7.3.1. TABLE OVERTRAVEL ALARM: RESETTING INSTRUCTIONS
 Press the icon to access the manual movements page.
 Press the enable push-button.
 Identify the Table field.
 If the "Table overtravel alarm (top)" cuts in, press the icon together with the start push-button.
 If the "Table overtravel alarm (bottom)" cuts in, press the icon together with the start push-button.
 Keep the icon and the start push-button pressed until the alarm message disappears from the notification area.
NOTIFICATION AREA