Mindray DC-40 User Manual

Patient Data Management 10-9
10.3 Report Management
 Report storage
The exam reports are stored under the directory of the exam of the patient.
 Importing, exporting and sending a report
In the iStation screen, select patient data, click [Restore Exam] or [Backup Exam] to
import or export patient information, images and reports from or to an external
memory device or network storage server.
You can also select whether to remove local patient exams data or only images after
backup.
See the following figure:
In the iStation or Review screen, click [Send Exam] to send patient data to an
external memory device or network storage server, you can choose if reports are
exported with images. See the figure below.
 To export the report
(1) Check [Report]→[Export] on the screen, and select the exported format, RTF or
PDF.
(2) Click [OK] to confirm.
You can select paper size for the report in the path: [Setup]Æ [Print Preset]Æ
[Print Service].
 Printing report
Use a connected graph/text printer to print a report.

Mindray DC-40 Specifications

General

Touch Screen	Yes
Hard Drive	500 GB
3D/4D Imaging	Yes
Storage Temperature	-20°C to +60°C
Operating Temperature	+10°C to +40°C
Atmospheric Pressure	700 hPa to 1060 hPa
Imaging Modes	B, M, Color Doppler, Power Doppler
Probes	Convex, Linear, Phased Array
Connectivity	DICOM, USB, Ethernet
Power Supply	100-240V AC, 50/60Hz
Display	15-inch color LCD