Patient Data Management 10-11
10.4.2 Searching a Patient
1. Select the data source.
2. Set search conditions of Name, ID, DOB, Exam Date in the "Item" drop-down list.
3. Enter the keyword in accordance with the “Item” selected, and the system searches
and displays the results in the patient list.
4. When you select a patient in the patient list, images of this patient will be displayed at
the bottom of the screen.
10.4.3 Patient Data View & Management
Select the desired patient information in the list. The following menu pops up:
Review an Image
Select an exam of a patient, click [Review Image] to enter Review screen.
Patient Information
Select an exam of a patient, click [Patient Info] to check the patient information of this
exam.
Review Report
After you select an exam of a patient, click [Review Report] to view the report of this
exam for this patient.
Delete Exam
Select an exam record, click [Delete Exam] to delete the record. However, you
cannot delete patient data being printed, exported or sent, or delete the current exam.
z To delete an image, select the image first and then click on the upper right
side.
Backup/ Restore
You can back up the selected patient data to the system-supported media in order to
view it on PC, or restore the patient data to the system from an external media.
z [Backup Exam]: click to back up the selected patient data to the system-
supported media. The backup data can be restored to the ultrasound system.
h You can select whether to remove images or the whole exam record from
the system.
z [Restore Exam]: click to import the patient data from an external media.
To Next Page
Loading...
Need help?
General
