Mindray DC-40 User Manual

Setup 12-7
 Footswitch function setting
You can assign a function to the left/mid/right key of footswitch. Setting method is
similar to key function setting, please refer to the above steps for setting.
 Other Settings
Item Description
Key Brightness To set the brightness for the keys.
Key Volume To set the key volume, 0 means no sound.
Trackball Speed To set the trackball speed when moving the trackball.
12.1.7 Admin
Open the page via “[Setup] Æ [System Preset] Æ [Admin].
For details of access control, please refer to “10.9 Administration”.

Mindray DC-40 Specifications

General

Touch Screen	Yes
Hard Drive	500 GB
3D/4D Imaging	Yes
Storage Temperature	-20°C to +60°C
Operating Temperature	+10°C to +40°C
Atmospheric Pressure	700 hPa to 1060 hPa
Imaging Modes	B, M, Color Doppler, Power Doppler
Probes	Convex, Linear, Phased Array
Connectivity	DICOM, USB, Ethernet
Power Supply	100-240V AC, 50/60Hz
Display	15-inch color LCD