EasyManuals Logo

Mindray DC-40 User Manual

Mindray DC-40
303 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Safety Precautions 1-5
21.
DO NOT touch the Signal I/O ports if in contact with the patient;
otherwise patient injury may result.
CAUTION:
1. Precautions concerning clinical examination techniques:
This system must be used only by qualified medical
professionals.
This operators manual does not describe clinical examination
techniques. The clinician should select the proper examination
techniques based on specialized training and clinical
experience.
2. Malfunctions due to radio wave:
If a radio wave emitting device is used in the proximity of this
system, it may interfere with operations. Do not use or take any
devices transmitting RF signals (such as cellular phones,
transceivers and radio controlled products) in the room placing
the system.
If a person brings a device that generates radio waves near the
system, ask him / her to immediately turn OFF the device.
3. Precautions concerning movement of the system:
Please install the system on a flat plane with casters locked.
Otherwise, damage may be resulted by accidental moving.
Do not move the system laterally, which may result in damage in
case of toppling.
Move the system slowly on the slope by two people, otherwise,
damage may result in case of unexpected sliding.
Do not sit on the system, which may result individual falling in
case of system moving.
Object placed on the monitor may fall and injure an individual.
Fasten and fully secure any peripheral device before moving the
system. A loose peripheral device may fall and injure an
individual.
When move the system on the steps, please take care to prevent
the system from toppling.
4. If the circuit protector is tripped, it indicates that the system or a
peripheral device was improperly shut down and the system is
unstable. You cannot repair the system under this circumstance
and must call the Mindray Customer Service Department or
sales representative.
5. There is no risk of high-temperature burns during normal
ultrasound examinations. It is possible for the surface
temperature of the probe to exceed the body temperature of a
patient due to environmental temperature and exam type
combinations. Do not apply the probe to the same region on the
patient for a long time. Apply the probe only for a period of time
required for the purpose of diagnosis.
6. Do not use the system to examine a fetus for a long period of
time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray DC-40 and is the answer not in the manual?

Mindray DC-40 Specifications

General IconGeneral
Touch ScreenYes
Hard Drive500 GB
3D/4D ImagingYes
Storage Temperature-20°C to +60°C
Operating Temperature+10°C to +40°C
Atmospheric Pressure700 hPa to 1060 hPa
Imaging ModesB, M, Color Doppler, Power Doppler
ProbesConvex, Linear, Phased Array
ConnectivityDICOM, USB, Ethernet
Power Supply100-240V AC, 50/60Hz
Display15-inch color LCD

Related product manuals