Setup 12-11
Note: The IP address of the system should not be occupied by other devices in the LAN,
otherwise DICOM function will fail.
Wireless LAN
WARNING
1. It is prohibited to use the wireless LAN function in
airplane, as it may violate the relevant provisions in the
aviation regulations.
2．
Use the wireless LAN function prudently in the
emergency ambulance (or other vehicles) as other
devices or communication signals may be interfered
with.
3. Be prudent to use the wireless LAN function in OR/ ICU/
CCU as it may interfere with other devices.
4. When wireless LAN function is turned on, the
ultrasound system may be interfered with by other
equipment, even if that other equipment complies with
CISPR EMISSION requirements.
To Use the W-LAN Function
The system can be configured with built-in wireless net adapter, so as to assist
information communication.
1. Press <Setup> to enter the Setup menu.
2. Enter [Network Preset] Æ[Local TCP/IP].
3. Select the wireless net adapter from the [Current Net Adapter] list, and the hotspots
being searched by the system are listed in the [Wireless Network Manager] box.
Tips: Usualy the DHCP is selected. If you select Static, please refer to 12.5.1 Local
TCP/IP to set IP Adres, Subnet Mask and Gateway.
4. Select the desired hotspot from the [Wireless Network Manager].
To Next Page
Loading...
Need help?
General
