Mindray DC-40 User Manual

A-2 Barcode Reader
1. Cable interface port
2. Interface cable modular connector
A.1.3 Setting
The reader has factory settings; please refer to A.4 for details.
The reader supports some user-defined functions as introduced below.
For more details, please contact the SYMBOL reader agents or Mindray Customer Service
Department.
 Volume setting:
Scan the following barcode to set the volume parameter.
 Code 93 and codebar scanning:
To enable or disable Code 93, scan the appropriate barcode below.
To enable Codebar, scan the appropriate barcode below.

Mindray DC-40 Specifications

General

Touch Screen	Yes
Hard Drive	500 GB
3D/4D Imaging	Yes
Storage Temperature	-20°C to +60°C
Operating Temperature	+10°C to +40°C
Atmospheric Pressure	700 hPa to 1060 hPa
Imaging Modes	B, M, Color Doppler, Power Doppler
Probes	Convex, Linear, Phased Array
Connectivity	DICOM, USB, Ethernet
Power Supply	100-240V AC, 50/60Hz
Display	15-inch color LCD