Mindray DC-40 User Manual

A-8 Barcode Reader
Paramete
r
Defaults
Code 39 Full ASCII Conversion Disable
Buffer Code 39 Disable
Code 93
Code 93 Enable
Set Length(s) for Code 93 4 to 55
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) Enable Enable
Set Lengths for I 2 of 5 14
I 2 of 5 Check Digit Verification Disable
Transmit I 2 of 5 Check Digit Disable
Convert I 2 of 5 to EAN 13 Disable
Codabar (NW - 7)
Codabar Enable
Set Lengths for Codabar 5 to 55
CLSI Editing Disable
NOTIS Editing Disable
A.3 Maintenance
Cleaning the exit window is the only maintenance required. A dirty window can affect scanning
accuracy.
z Do not allow any abrasive material to touch the window
z Remove any dirt particles with a damp cloth
z Wipe the window using a tissue moistened with ammonia/water
z Do not spray water or other cleaning liquids directly into the window.

Mindray DC-40 Specifications

General

Touch Screen	Yes
Hard Drive	500 GB
3D/4D Imaging	Yes
Storage Temperature	-20°C to +60°C
Operating Temperature	+10°C to +40°C
Atmospheric Pressure	700 hPa to 1060 hPa
Imaging Modes	B, M, Color Doppler, Power Doppler
Probes	Convex, Linear, Phased Array
Connectivity	DICOM, USB, Ethernet
Power Supply	100-240V AC, 50/60Hz
Display	15-inch color LCD