Mindray DC-40 User Manual

E-2 Ultrasound Gel Warmer
No. Name Function
5. Bottom cover /
E.3 Specifications
 Power supply
Voltage
12 V
Power consumption 12 W
 Environmental conditions
Operating conditions Storage and transportation
conditions
Ambient
temperature
0°C~40°C -20°C~55°C
Relative humidity 30%~85% (no condensation) 20%~95% (no condensation)
Atmospheric
pressure
700hPa~1060hPa 700hPa~1060hPa
E.4 Function and Requirement
The ultrasound gel warmer can heat the ultrasound gel to about 40±1°C at the most.
When the gel is placed inside the warmer, the time it takes to heat from an ambient
temperature of 18°C to 28°C should be no more than 0.5 hours.
The ultrasound gel warmer can work continuously over 12 hours.
NOTE: 1. When the ambient temperature is higher than the required temperature of
the warmer, the warmer does not function.
2. The warmer can only heat one bottle of gel at a time.

Mindray DC-40 Specifications

General

Touch Screen	Yes
Hard Drive	500 GB
3D/4D Imaging	Yes
Storage Temperature	-20°C to +60°C
Operating Temperature	+10°C to +40°C
Atmospheric Pressure	700 hPa to 1060 hPa
Imaging Modes	B, M, Color Doppler, Power Doppler
Probes	Convex, Linear, Phased Array
Connectivity	DICOM, USB, Ethernet
Power Supply	100-240V AC, 50/60Hz
Display	15-inch color LCD