What to do if Mindray DC-70 Exp control panel has some or a certain key on the small keyboard fails?
If some or a certain key on the small keyboard fails on your Mindray Medical Equipment control panel, replace the small keyboard assembly.
What to do if Mindray DC-70 Exp Medical Equipment IO interface system has two loudspeakers are mute?
If two loudspeakers are mute on your Mindray Medical Equipment and the self-test for Audio Test fails, it indicates a PC carrier board error. Replace the PC carrier board.
What to do if Mindray DC-70 Exp Medical Equipment IO interface system has MIC malfunction?
If the MIC malfunctions on your Mindray Medical Equipment and the self-test for the Microphone Interface Test fails, and the MIC works well, the error may occur to the PC carrier board. Replace the PC carrier board.
What to do if Mindray DC-70 Exp Medical Equipment ECG module has abnormal waveform?
If you enable ECG on your Mindray Medical Equipment and the waveform appears as a signal line or the shape of the wave is abnormal, it may be due to an abnormal ECG lead or ECG module. Self test for ECG module and replace the ECG lead or ECG module.
What to do if Mindray DC-70 Exp IO interface system has only one loudspeaker is mute?
If only one loudspeaker is mute on your Mindray Medical Equipment and the self-test for Audio Test fails, it indicates a loudspeaker error. Replace the loudspeaker.
What to do if Mindray Medical Equipment system cannot power on, AC indicator is on, power on/off indicator is off, and power status indicator is off?
If your Mindray Medical Equipment system cannot power on, the AC indicator remains on, the power on/off indicator is off, and the power status indicator is off, the PC carrier board is likely failing. Replace the PC board.
What to do if Mindray Medical Equipment system cannot power on?
If the Mindray Medical Equipment system fails to power on, begin by checking the backlight of the power button. Also, inspect the AC indicator on the control panel and verify the three power supply indicators on the IO back board.
What to do if the Mindray DC-70 Exp Medical Equipment AC indicator remains on, the power on indicator is off or doesn't blink, and the power status indicator (3.3 V/5 V/12 V) is off?
If the AC indicator remains on, the power on/off indicator is off or does not blink after pressing the button, and the power status indicator (3.3 V/5 V/12 V) is off, the PC carrier board is likely the cause. Replace the PC board.
What to do if Mindray Medical Equipment IO interface system has network disconnected or abnormal?
If the network is disconnected or abnormal on your Mindray Medical Equipment, and the network and settings are correct, the issue may be with the IO board or PC module. Replace the IO board or PC module.
What to do if Mindray Medical Equipment control panel keys work well, but single encoder does not work?
If the control panel keys on your Mindray Medical Equipment work well, but a single encoder does not work, it indicates a single encoder error. Replace the encoder board.
Covers electric, mechanical, personnel, and other safety measures for system operation.
Provides instructions for safely moving and positioning the system to prevent damage.
Outlines necessary preparations, power supply requirements, grounding, and EMI limitations.
Provides step-by-step instructions for installing the main unit and connecting peripherals.
Guides through running the system, configuring settings, and network setup.
Explains the functions and components of the front-end unit, including probe and TR boards.
Details the back-end unit's architecture, including PC module, GPU, storage, and I/O interfaces.
Provides a step-by-step guide for performing general system checks and content.
Details how to check functions across various imaging modes like B, M, Color, and PW/CW.
Explains how to conduct performance tests such as resolution, depth, and accuracy.
Guides on entering maintenance mode and configuring system installation settings.
Provides procedures for installing, restoring, and activating system software and OS.
Lists parts and order numbers for the main control panel and main unit assemblies.
Step-by-step guides for disassembling display, control panel, and internal components.
Lists hardware configurations for optional devices like ECG, battery, and CW assembly.
Details the sequence of events during system power-on and startup processes.
Provides guidance on identifying and resolving system alarms and errors.
General| Touch Screen Size | 10.4 inch |
|---|---|
| Probe Ports | 4 |
| Power Supply | 100-240V AC, 50/60Hz |
| Connectivity | DICOM, USB, Ethernet |
| Applications | Abdominal, Cardiac, OB/GYN, Vascular |
| Weight | 85 kg |
| Doppler Modes | PW, CW, Color Doppler, Power Doppler |
| Imaging Modes | 2D, M-Mode, 4D |
| Storage | 500GB hard drive |
To Next Page
