Minebea Intec PR 5310 - Page 128

6. Operating | 6.2 - Configuration and adjustment via the keypad | 128
GroSS appears on the display.
6. Press / to select the corresponding mode, see parameter table.
7. Press "OK".
Ao 051 appears on the display.
8. Press "OK".
AnA.rnG appears on the display.
9. Press "OK".
0-20MA appears on the display.
10. Press / to select the corresponding range, see parameter table.
11. Press "OK".
Ao 052 appears on the display.
12. Press "OK".
out.Err appears on the display.
13. Press "OK".
4 MA appears on the display.
14. Press / to select the corresponding output value, see parameter
table.
15. Press "OK".
Ao 053 appears on the display.
16. Press "OK".
out.< 0 appears on the display.
17. Press "OK".
4 MA appears on the display.
18. Press / to select the corresponding output value, see parameter
table.
19. Press "OK".
Ao 054 appears on the display.
20. Press "OK".
out.>20 appears on the display.