Minebea Intec PR 5310 - Page 129

6. Operating | 6.2 - Configuration and adjustment via the keypad | 129
21. Press "OK".
20 MA appears on the display.
22. Press / to select the corresponding output value, see parameter
table.
23. Press "OK".
Ao 055 appears on the display.
24. Press "OK".
WGt.0/4 appears on the display.
25. Press "OK".
000000 appears on the display (the last digit flashes).
26. Press / and / to input the corresponding weight value.
27. Press "OK".
Ao 056 appears on the display.
28. Press "OK".
WGt. 20 appears on the display.
29. Press "OK".
030000 appears on the display (the last digit flashes).
30. Press / and / to input the corresponding weight value.
31. Press "Exit".
32. Save the changes.