XIII
History of revision
Date Instruction manual No. Details of revised point
AUG, 1999 DRW. NO.EN294-1107
First version ROM Ver.1.000 or later
May. 2000 DRW. NO.EN294-1107-A
Due to ECN No. FN00−02060.
−Correction−
−The size in the Outline dimensions in P. Ⅴ, 6 and 96 is
changed.
Nov. 2000 DRW. NO.EN294-1107-B
Due to ECN NO.FN00−02109
－ Additional －
Add the Details and conditions of comformance to CE
standard
Mar. 2001 DRW. NO.EN294-1107-C
Due to ECN No.FN01−02042
－ Correction －
P.55 7−2−6 Output condition at Positive logic
Output data “Yes”→Condition of transistor “OFF”
Output data “No”→Condition of transistor “ON”
July, 2001 DRW. NO.EN294-1107-D
Due to ECN No.FN01−02105
－Change－
Change the unit of power consumption from “VA” to “W”.
Sep. 2001 DRW. NO.EN294-1107-E
Due to ECN No.FN01−02134
－Changeー
Operating temperature range
“0 ℃ to 50 ℃”→ “－10 ℃ to 50 ℃”
Dec. 2003 DRW. NO.EN294-1107-F
Due to ECN No.FN03−02188
－Changeー
12−2. Screw size for attachment/removal of metal cover
“6−bind machine screw M3x6”→“6−bind machine screw
M3x10”
Sep. 2004 DRW. NO.EN294-1107-G
Due to ECN No.FN04−02111
－Changeー
7−13. “Back−up life will be about 10 years or more...” has
changed to “Back−up life will be about 10 years...”.
Apr. 2005 DRW. NO.EN294-1107-H
Due to ECN No.FN05−02035
− Addition −
At the warning column in the wiring section, the clause of ”As
there is a case which standard wiring color is different, please
confirm the inspection data sheet of the load cell being used.”
is added.
June. 2009 DRW. NO.EN294-1107-I
Due to ECN.FN09−02035
Changed CE conformity standard EN61326−1:2006
−Addition−
”Immunity test requirements for equipment intended for use
in industrial locations”
Feb. 2010 DRW. NO.EN294-1107-J
Due to ECN.FN10−02026
− Change −
Front cover’s logo is changed.
Oct. 2010 DRW. NO.EN294-1107-K
Due to ECN.FN10−02140
− Change −
Minebea logo is changed.
To Next Page
