III
For safe operation
Be sure to read this manual before use.
1. Installation place
● Use the instrument where the temperature/humidity specifies within
the range as follows:
Environmental temperature：−10 ℃ to 50 ℃
Environmental humidity：Less than 85 %R.H.(Non condensing.)
(1) Location where installation is not allowed.
Warning ● Don’t locate the instrument on the places such as follows:
It may cause an unexpected faulty in the instrument.
D Don’t expose the instrument in direct sunlight and/or high temperature
area.
D Don’t use the instrument in a high humid area.
D Don’t install the instrument where there is high mechanical vibration.
D Don’t use the instrument where there is an excess of dusts and fine
particles.
D Don’t install the instrument where there includes any corrosive gas or any
salty atmosphere.
D Don’t install the instrument where there is rapid change of temperature
and humidity.
D Don’t install the instrument near the devices that are magnetized or
generate an electromagnetic field.
D Don’t install the instrument where there may suffer radioactivity or
radioactive rays.
D Avoid the location where chemical reaction may take place such as in a
laboratory.
To Next Page
Loading...
