miniDSP Flex - Page 76

3/15/23, 9:45 AM
Print or save - miniDSP Flex
https://docs.minidsp.com/product-manuals/flex/print_page.html
76/86
Channels
INPUT 1
INPUT 2
BACK
FIR Details (Output 1)
Click to jump to the other channel
MenuEnable FIR
FIR lter design software
The lter coecients must be created with the aid of lter design software. miniDSP does not provide any such
software, instead referring you to the many software packages available for this purpose (both freeware and
commercial). Please see the FIR lter tools (https://www.minidsp.com/applications/advanced-tools/r-lter-tools)
page on our website. The design program must be set for a 96 kHz sample rate.
Tips
If, after selecting a lter le or setting coecients, the frequency response graph does not change as expected, make
sure that the Enable FIR switch is turned on.
If you zero all* lter taps, make sure that you also disable the the lter, otherwise there will be no audio through that
channel.
Tip
Tip