3 Certifications
3.1 Overview
This chapter presents certificates and declarations applying to the robot.
Copies of the CE declarations of conformity in various languages and 3rd party certificates are
posted and can be downloaded from the Distributor login site: (http://www.mir-robots.com/
downloads/certificates).
3.2 Certificates
The MIR200 has been tested and awarded the following certificates by a recognized test institute.
Cleanroom
The MiR200 has been assessed and rated suited for operation in cleanrooms fulfilling the
specifications of Air Cleanliness Classes according to ISO 14644-1.
Electrical
resistance
The MiR200 has been examined and awarded a certificate for its electrical resistance in accordance
with DIN EN 61340-2 -3.
Signed copies of the certificates are found in the appendix Certificates on page 40
3.3 Applied standards
The MiR200™ is certified and fulfills all relevant provisions according to the EU directives or
regulations listed below.
The European directives are available on the official website: https://eur-lex.europa.eu
Reference to the harmonized standards used, as referred to in Article 7(2):
Ref. no. Title
2006/42/EC
Directive 2006/42/EC of the European Parliament and of the Council of 17 May
2006 on machinery, and amending Directive 95/16/EC (recast) (1).
Ref. no. Title
EN
60204-1:2006+A1:2009
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
EN ISO 12100:2010 Safety of machinery – General principles for design – Risk assessment and risk
reduction (ISO 12100:2010)
EN ISO 13849-1:2015 Safety of machinery – Safety related parts of control systems – Part 1: General
principles for design (ISO 13849-1:2015)
EN ISO 13849-2:2012 Safety of machinery – Safety related parts of control systems – Part 2: Validation
(ISO 13849-2:2012)
EN ISO 13850:2015 Safety of machinery – Emergency stop function – Principles for design (ISO
13850:2015)
To Next Page
