5 Product presentation
5.1 About the MiR200™
The MiR200™ is an autonomous mobile robot that can transport materials internally within
production facilities, hospitals, warehouses, and a host of other industrial locations.
The user provides the destination of product delivery via a web-based user interface. MiR200™ can
be set up to run a fixed route, be called on demand or perform more complex operations (missions).
It can also operate as part of a fleet of MiR robots, centrally controlled from a single web based user
interface. It is recommended to use the MiRFleet application when two or more robots operate on
the same site.
The MiR200™ operates via a map which can be created the first time the robot is used. While
operating, the safety scanners ensure that the robot avoids obstacles (people, furniture) that are not
mapped. The internal map contains defined locations (office, product delivery, production hall etc.)
that are used for logistical planning.
With a MiRCharge™ charging station the robot handles moving to a charging station automatically.
All it takes is the definition of a charging mission and a charing position on the map.
The robot is controlled from a web-based user interface, which is accessed via a browser on a
PC, smartphone or tablet
. Each robot has its own network. See Getting connected on page 15.
5.2 Identification label
The identification label of the MiR200™ is placed on back of the battery box.
Figure 5.1. Example of MiR200™ CE marking and identification label
•
CE
Mobile Industrial Robots ApS declares that the MiR200™ meets
the requirements of the applicable EC directives. See Declaration
of conformity on page 42
•
Serial number
The 15-digit serial number is a unique identifier of the robot. The
last four digits form part of the original name of the robot, e.g. MiR
S200.
• MiR200 2.0 Product name and hardware version
To Next Page
Loading...
