•
•
•
•
•
•
Repacking for transport
MiR200™ User Guide, Robot interface 2.0, 11/2018 v.1.2 30
8.2 Packing the robot for transportation
Before packing the robot, it must be shut down as follows:
1. Bring the robot to a halt and push the blue power button to turn off the robot.
2. Turn off the battery disconnect switch (the two yellow indicators pointing to Off).
To pack the robot, reverse the steps of the unpacking procedure, see Unpacking the MiR200™ on
page 11.
The robot must always be packed and transported in an upright position. Packing and
transporting the robot in any other position will void the warranty.
To Next Page
Loading...
