MIR MiR200 - 2.3 General Safety Instructions & Warnings

•
•
•
•
•
•
Safety
MiR200™ User Guide, Robot Interface 2.0, 11/2018 v.1.2 4
2.3 General safety instructions
This section contains general safety notes. Some safety notes are repeated or further specified in
other sections of the manual and further safety notes are present throughout the manual.
2.3.1 Warning notes
• Ensure proper mounting of loads during transport
Danger of personal injury from overturning robot or falling load.
All accessories and loads mounted on top of the robot should be fastened correctly and meet specifications.
See Technical specifications on our website.
•
Avoid leakage of fluid during transport
Danger of personal injury from leaking fluid.
Make sure that loads containing fluids do not leak during transport.
•
Use only the original charger
Danger of personal injury and/or damage to the robot.
Use of other charger than the one supplied by the manufacturer can ruin the battery and may cause fire.
•
Update maps to avoid hazards on the route
Danger of personal injury and/or damage to the robot.
Make sure to update maps to avoid driving in hazardous zones such as close to stairways.
•
Do not drive the robot irresponsibly
Danger of personal injury and/or damage to the robot.
The robot should not be driven over edges or in other ways operated irresponsibly.