•
•
•
•
•
•
Safety
MiR200™ User Guide, Robot Interface 2.0, 11/2018 v.1.2 5
2.3.2 Caution notes
•
Do not use the robot to transport people
Risk of personal injury and/or damage to the robot.
The robot should never be used to transport people. This will revoke compliance with the standard EN 1525
Safety for unmanned trucks.
•
Avoid gradients above 5% on the route
Risk of personal injury and/or damage to the robot.
The surface grade (ramps etc.) cannot exceed 5% as this may cause the robot to skid.
•
Only drive on even and dry surface
Risk of personal injury and/or damage to the robot.
Wet and uneven surfaces may cause the robot to skid.
•
Do not overload the robot
Risk of personal injury and/or damage to the robot.
The maximum payload for the load on top of the robot is 200 kg 440 lbs kg. If exceeded, it may cause
overturning, falling load and damage to the robot. See also Payload specifications on page 31.
•
Do not use robot on board ships
Risk of personal injury and/or damage to the robot.
Unstable surface caused by moving vessel may cause the robot to skid.
•
Turn off the main power immediately after removal of the top cover
Risk of personal injury and/or damage to the robot.
Turn off main power relay to avoid short circuit. See Product presentation on page 19
To Next Page
Loading...
