MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 48
SELECT DIGIT FOR HOLD
To select the digit to put the caller on hold, scroll through until you reach the feature as shown below
[1=Bck] [3=Fwd]
Do you want to
Program HOLD?
[*=Abort] [#=Yes]
Press # to select hold digit. The display will be...
[1=Bck] [3=Fwd]
Hold on digit
1,2, or 3 (_)
[*=Abort] [#=Yes]
Type in the digit you require and then press #. When finished, the system should exit to PROGRAM MODE menu.
To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL MODE.
* * * * End of Programming * * * *
To Next Page
Loading...
Need help?
General
