28
SLC Integration - QX-mini and FleX-Net™ - Single Stage
5.2 Wiring
For SLC integration, connect wire from preferred loop of FleX-Net™ to SLC terminal on QX-
mini Master.
Note: If the system is comprised of a QX-mini Master and booster panels,
only the QX-mini Master must be wired with FACP.
5.2.1 Class A
Figure 41 Class A wiring to connect FACP with QX-mini master via SLC link
5.2.2 Class B
Figure 42 Class B wiring to connect FACP with QX-mini master via SLC link
To Next Page
Loading...
