SLC Integration - QX-mini and FX-2000 - Two Stage
67
10.2 Wiring
For SLC integration: Connect wire from preferred loop of FX-2000 to SLC terminal on QX-mini
Master.
Note: If system is comprised of a QX-mini Master and booster panels, only
the QX-mini Master must be wired with FACP.
10.2.1 SLC-Class A
Figure 98 Class A wiring to connect FACP with QX-mini Master via SLC link
10.2.2 SLC-Class B
Figure 99 Class B wiring to connect FACP with QX-mini Master via SLC link
To Next Page
Loading...
