9 CREATING A HARDWARE LOGIC
9.2 Multi Function Counter Block
135
9
Event input terminal
In the first section in a multi function counter block detail window, event input terminals are arranged by default. For a 16-bit
counter, four event input terminals ("Event 0" to "Event 3") are arranged. For a 32-bit counter, two event input terminals
("Event 0", "Event 1") are arranged.
They are used to use signals input to a multi function counter block in the hardware logic outline window ("Event 0" to "Event
3") as event signals in the multi function counter block detail window.
Output
The following table shows the output of the event input terminal.
*1 The event input terminal can link with all the terminals of a counter timer block.
Variable name Data type Linkable block Valid range Description
Event Bit Counter timer
*1
0, 1 Outputs the High/Low states of Event terminals of a
multi function counter block in the hardware logic
outline window.
To Next Page
Loading...
