14
TERMS
Unless otherwise specified, this manual uses the following terms.
PACKING LIST
The following items are included in the package of this product. Before use, check that all the items are included.
Term Description
Buffer memory A memory in an intelligent function module, where data (such as setting values and monitoring values) exchanged with
a CPU module are stored
Configuration tool The abbreviation for the configuration tool for flexible high-speed I/O control modules (SW1DNN-FLEXIOP-E)
Display unit A liquid LCD to be attached to the CPU module
Execution memory The memory in a flexible high-speed I/O control module where the hardware logic is written
External wiring Wiring between a flexible high-speed I/O control module and external devices
Flash ROM A non-volatile memory to which the hardware logic can be written. Although the number of writes to a flash ROM is
limited, the written hardware logic is not deleted even after the power off and automatically read at the power-on.
Flexible high-speed I/O control
module
The abbreviation for the MELSEC-L series flexible high-speed I/O control module LD40PD01
GX LogViewer The software for visually displaying execution results of the simulation function
GX Works2 The product name of the software package for the MELSEC programmable controllers
Hardware logic A control logic that users create graphically combining inputs, outputs, logical operation circuits, and counters with the
configuration tool
Head module The Abbreviation for the LJ72GF15-T2 CC-Link IE Field Network head module
Link To connect blocks or terminals on the configuration tool
Programming tool Another name for GX Works2
Flexible high-speed I/O control module
Module
Before Using the Product
To Next Page
Loading...
