Mitsubishi Electric MELSEC-L Series LD40PD01 - System Configuration

32
4 PROCEDURES BEFORE OPERATION
4 PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1. Installing the module
Install the flexible high-speed I/O control module with a desired configuration.
Page 34 Overall Configuration
2. External wiring
Wire external devices to the flexible high-speed I/O control module.
Page 37 External Wiring
3. Creating a hardware logic
Create a hardware logic with the configuration tool.
Page 63 FUNCTIONS OF THE CONFIGURATION TOOL
4. Programming and debugging
Create and check a program.
Page 207 DISPLAY UNIT