9 CREATING A HARDWARE LOGIC
9.2 Multi Function Counter Block
127
9
9.2 Multi Function Counter Block
In the third section in the hardware logic outline window, up to eight multi function counter blocks ("Counter_0" to "Counter_7")
can be arranged.
Set details on how to count pulses of input signals in a multi function counter block detail window. To shift to a multi function
counter block detail window, double-click the corresponding block in the hardware logic outline window.
Type
There are the following four types of multi function counter blocks.
Name Block diagram Specifications
Available
count value
Number of
Latch
terminals
Number of
Event
terminals
Availability
of "Cam
Output"
terminal
Counter_(16bit_Signed)
(16-bit signed multi function
counter block)
16-bit signed
value
24
Counter_(16bit_Unsigned)
(16-bit unsigned multi
function counter block)
16-bit
unsigned
value
24
Counter_(32bit_Signed)
(32-bit signed multi function
counter block)
32-bit signed
value
12
To Next Page
Loading...
