Mitsubishi Electric MELSEC-L Series - Example of Communications Using a Fixed Buffer; System Configuration; Parameter Setting

146
12.9 Example of Communications Using a Fixed Buffer
This section describes an example of communications using a fixed buffer in the "Procedure Exist" control method
between an E71 and the connected device.
12.9.1 System configuration
The following system configuration is used for explanation purpose.
12.9.2 Parameter setting
This section describes a parameter setting example.
(1) Sending side (LCPU-1 side)
The following is an example of the parameter settings of the sending side (LCPU-1 side).
(a) Basic setting
The following is an example of the basic setting.
LCPU-1
(10.97.85.222)
Ethernet
LCPU-2
(10.97.85.223)