66
7.1.2 Basic setting
Set items, such as a network number and station number.
Project window [Parameter] [Network Parameter] [Ethernet/CC IE Field] Select
"Ethernet" under "Network Type".
Item Description Setting range
Network Type Select "Ethernet".
Start I/O No. Set the start I/O number of the E71 in units of 16 points.
Within the number of I/O points of the
CPU module
Network No. Set the network number of the E71. 1 to 239
Group No. Set the group number of the E71. 0 to 32
Station No. Set the station number of the E71. 1 to 64
Mode Select the operation mode of the E71.
•Online
•Offline
• Self-Loopback Test
• H/W Test
To Next Page
Loading...
