183
CHAPTER 14 OTHER FUNCTIONS
14
14.4 Remote Password
14.4.3 Remote password check procedure
14.4.3 Remote password check procedure
This section describes the procedure of the remote password check performed by the E71.
(1) Communications in which an entered remote password is checked
When the following parameters have been set for the E71 on the LCPU station, the E71 checks a remote
password for communication requests listed below.
• When a remote password has been set in the CPU module
• When the connection where the E71 communicates with a connected device has been set as the target for
the remote password check
The E71 checks an entered remote password for a communication request addressed to the own station/another
station received from a connected device.
The E71 performs a send process upon the following send requests without checking an entered remote
password.
• Send request from the CPU module on the own station (such as communications using a fixed buffer)
• Communication request from the connected device (including the programming tool connected to the CPU
module on the own station) to send data to another station upon request from the CPU module
*1 A communication request from the connected device cannot be accepted because a remote password check has been
set. If the remote password check has not been set, the communication request is accepted, and the E71 can
communicate with the connected devices.
(2) Selecting a connection for which the remote password check is performed
A connection for which an entered remote password is checked can be selected using a parameter. ( Page
190, Section 14.4.6)
LCPU
Path checked using
a remote password
E71
Path not checked using
a remote password
Programming tool
Remote password
check
Remote password
check
LCPU
(Own station)
(Another station)
E71
Remote password
Remote
password
(*1)
Programming tool
To Next Page
Loading...
