Mitsubishi Electric MELSEC-L Series - Checking the Status of the E71 with the System Monitor

301
CHAPTER 16 TROUBLESHOOTING
16
16.9 Checking the Status of the E71 with the System Monitor
16.9 Checking the Status of the E71 with the System Monitor
Open the system monitor window of a programming tool to check the LED status, connection status, and operating
status of the E71.
1. Open the "System Monitor" window.
[Diagnostics] [System Monitor]
2. Select the module to diagnose in the "Main Block" field in the upper left of the window. Then click
the button.
3. The "H/W Information" is displayed.