EasyManua.ls Logo

Mitsubishi Electric MELSEC-L Series - List of I;O Signals

Mitsubishi Electric MELSEC-L Series
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
3.4 List of I/O Signals
The following table lists the I/O signals for an E71. The I/O signal assignment of when the start I/O number of an E71 is
0000 is listed below.
Device
number
Signal name
Device
number
Signal name
X0
For fixed buffer communication of connection No.1 (ON:
Sending normal completion or reception completion, OFF: -)
Y0
Connection No.1 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X1
For fixed buffer communication of connection No.1 (ON:
Detection of sending error or reception error, OFF: -)
Y1
Connection No.2 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X2
For fixed buffer communication of connection No.2 (ON:
Sending normal completion or reception completion, OFF: -)
Y2
Connection No.3 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X3
For fixed buffer communication of connection No.2 (ON:
Detection of sending error or reception error, OFF: -)
Y3
Connection No.4 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X4
For fixed buffer communication of connection No.3 (ON:
Sending normal completion or reception completion, OFF: -)
Y4
Connection No.5 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X5
For fixed buffer communication of connection No.3 (ON:
Detection of sending error or reception error, OFF: -)
Y5
Connection No.6 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X6
For fixed buffer communication of connection No.4 (ON:
Sending normal completion or reception completion, OFF: -)
Y6
Connection No.7 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X7
For fixed buffer communication of connection No.4 (ON:
Detection of sending error or reception error, OFF: -)
Y7
Connection No.8 (ON: At sending request or reception complete
confirmation signal, OFF: -)
X8
For fixed buffer communication of connection No.5 (ON:
Sending normal completion or reception completion, OFF: -)
Y8
Connection No.1
(ON: Open request, OFF: -)
X9
For fixed buffer communication of connection No.5 (ON:
Detection of sending error or reception error, OFF: -)
Y9
Connection No.2
(ON: Open request, OFF: -)
XA
For fixed buffer communication of connection No.6 (ON:
Sending normal completion or reception completion, OFF: -)
YA
Connection No.3
(ON: Open request, OFF: -)
XB
For fixed buffer communication of connection No.6 (ON:
Detection of sending error or reception error, OFF: -)
YB
Connection No.4
(ON: Open request, OFF: -)
XC
For fixed buffer communication of connection No.7 (ON:
Sending normal completion or reception completion, OFF: -)
YC
Connection No.5
(ON: Open request, OFF: -)
XD
For fixed buffer communication of connection No.7 (ON:
Detection of sending error or reception error, OFF: -)
YD
Connection No.6
(ON: Open request, OFF: -)
XE
For fixed buffer communication of connection No.8 (ON:
Sending normal completion or reception completion, OFF: -)
YE
Connection No.7
(ON: Open request, OFF: -)
XF
For fixed buffer communication of connection No.8 (ON:
Detection of sending error or reception error, OFF: -)
YF
Connection No.8
(ON: Open request, OFF: -)
X10
Open completed for connection No.1
(ON: Open completion signal, OFF: -)
Y10 Use prohibited
X11
Open completed for connection No.2
(
ON: Open completion signal, OFF: -)
Y11 Use prohibited
X12
Open completed for connection No.3
(ON: Open completion signal, OFF: -)
Y12 Use prohibited
X13
Open completed for connection No.4
(ON: Open completion signal, OFF: -)
Y13 Use prohibited
X14
Open completed for connection No.5
(ON: Open completion signal, OFF: -)
Y14 Use prohibited
X15
Open completed for connection No.6
(ON: Open completion signal, OFF: -)
Y15 Use prohibited
X16
Open completed for connection No.7
(ON: Open completion signal, OFF: -)
Y16 Use prohibited
X17
Open completed for connection No.8
(ON: Open completion signal, OFF: -)
Y17
COM.ERR. LED Off request
(ON: At off request, OFF: -)
X18
Open abnormal detection signal
(ON: At off request, OFF: -)
Y18 Use prohibited

Table of Contents

Other manuals for Mitsubishi Electric MELSEC-L Series

Related product manuals