300
16.8 Ethernet Diagnostics
Items such as the module status, parameter settings, communication status, and error history of an E71 can be
checked. Perform the diagnostics in the "Ethernet Diagnostics" window of the programming tool.
[Diagnostics] [Ethernet Diagnostics...]
For each window and detailed explanations, refer to the following.
Operating manual for the programming tool used
Item Description
Target Module Setting (Module No.)
Specify the E71 to be monitored. The number of other network modules is not
included.
Parameter Status Module information (such as the IP address and basic settings) is displayed.
Error History
The number of errors and their details (such as the error code and information about
the connection where the error has occurred) is displayed.
Status of Each Connection The status of each connection (such as error codes and the open setting) is displayed.
Status of Each Protocol
Information such as the total number of data sending/receiving times for each protocol
is displayed.
LED Status The operation mode and the LED status of the E71 are displayed.
Received E-mail Information Received mail information and the error log are displayed.
Send E-mail Information Sent mail information and the error log are displayed.
button
The "PING Test" window is displayed.
button
The "Loopback Test" window is displayed.
button
The COM.ERR. LED is turned off. ( Page 303, Section 16.10)
To Next Page
Loading...
