187
CHAPTER 14 OTHER FUNCTIONS
14
14.4 Remote Password
14.4.4 Differences in functions according to the remote password check status (enabled/disabled)
*1 A dedicated connection is used for "No Procedure" communications using a fixed buffer or communications using the
predefined protocol. Do not set the remote password for the connection with the connected device.
*2 Remote password check is not performed against the e-mail function.
*3 If a remote password has been set to the CPU module on the relay station or station to be accessed where the E71 is
connected, access to another station may not be performed.
File transfer (FTP server) function
Within Ethernet, communications are
enabled with the connected device that
has completed an open process.
After an open process is completed,
communications are enabled from the time
that the unlock command is received until
the lock command is received.
Function
Remote password check setting
Disabled Enabled
To Next Page
Loading...
