17
Predefined protocol support function
A function of GX Works2.
This function sets protocols appropriate to each external device and reads/writes protocol setting
data from/to the flash ROM of the E71.
Programming tool Another term for GX Works2
READ The abbreviation for JP.READ and GP.READ
RECV The abbreviation for JP.RECV and GP.RECV
RECVS The abbreviation for Z.RECVS
REQ The abbreviation for J.REQ, JP.REQ, G.REQ, and GP.REQ
SEND The abbreviation for JP.SEND and GP.SEND
SLMP
The abbreviation for Seamless Message Protocol.
This protocol is used to access an SLMP-compatible device or a programmable controller
connected to an SLMP-compatible device from an external device.
SMTP
The abbreviation for Simple Mail Transfer Protocol. This protocol is used to transfer e-mails over
the Internet.
SREAD The abbreviation for JP.SREAD and GP.SREAD
Subnet mask
A number used to logically divide one network into multiple subnetworks and manage them easily.
The following Ethernet network systems can be configured:
• A small-scale Ethernet network system in which multiple network devices are connected
• A medium- or large-scale network system in which multiple small-scale network systems are
connected via routers or other network communication devices
SWRITE The abbreviation for JP.SWRITE and GP.SWRITE
UINI The abbreviation for ZP.UINI
WRITE The abbreviation for JP.WRITE and GP.WRITE
ZNRD The abbreviation for J.ZNRD and JP.ZNRD
ZNWR The abbreviation for J.ZNWR and JP.ZNWR
Term Description
To Next Page
Loading...
