208
(S)+12
Matched receive
packet No.3
When the communication type of the third protocol
executed includes receiving, the matched receive
packet number is stored. When the communication
type is "Send Only", "0" is stored.
If an error occurs to the third protocol executed, "0"
is stored.
When the number of protocols which are executed is
less than 3, "0" is stored.
0, 1 to 16 System
(S)+13
Matched receive
packet No.4
When the communication type of the fourth protocol
executed includes receiving, the matched receive
packet number is stored. When the communication
type is "Send Only", "0" is stored.
If an error occurs to the fourth protocol executed, "0"
is stored.
When the number of protocols which are executed is
less than 4, "0" is stored.
0, 1 to 16 System
(S)+14
Matched receive
packet No.5
When the communication type of the fifth protocol
executed includes receiving, the matched receive
packet number is stored. When the communication
type is "Send Only", "0" is stored.
If an error occurs to the fifth protocol executed, "0" is
stored.
When the number of protocols which are executed is
less than 5, "0" is stored.
0, 1 to 16 System
(S)+15
Matched receive
packet No.6
When the communication type of the sixth protocol
executed includes receiving, the matched receive
packet number is stored. When the communication
type is "Send Only", "0" is stored.
If an error occurs to the sixth protocol executed, "0"
is stored.
When the number of protocols which are executed is
less than 6, "0" is stored.
0, 1 to 16 System
(S)+16
Matched receive
packet No.7
When the communication type of the seventh
protocol executed includes receiving, the matched
receive packet number is stored. When the
communication type is "Send Only", "0" is stored.
If an error occurs to the seventh protocol executed,
"0" is stored.
When the number of protocols which are executed is
less than 7, "0" is stored.
0, 1 to 16 System
(S)+17
Matched receive
packet No.8
When the communication type of the eighth protocol
executed includes receiving, the matched receive
packet number is stored. When the communication
type is "Send Only", "0" is stored.
If an error occurs to the eighth protocol executed, "0"
is stored.
When the number of protocols which are executed is
less than 8, "0" is stored.
0, 1 to 16 System
Device Item Setting data Setting range Set by
To Next Page
Loading...
