Mitsubishi Electric MELSEC-L Series - Page 264

262
*1 When the setting value gets Unidentified (65535), the following causes are possible:
 When settings undetectable with the E71 used are written
 When the protocol setting data is broken (hardware failure)
Protocol registration
5330
H
to
533F
H
The information about whether protocol setting data has been registered is shown by on/off
status of the corresponding bit.
When the check results include any error, 0 is stored in all bits.
Buffer memory name Address Description
to
to
to
b0b1b2tob15 b14 b13
5330 H
5331 H
5337 H
Buffer memory address
Registration status of
protocol No.16
Registration status of
protocol No.1
Registration status of
protocol No.128
Registration status of
protocol No.113
0 (OFF): Not registered
1 (ON): Registered
to
to
5338 H
533F H
Unused
(reserved)