30
(2) Special functions
The following special functions are also available. For the functions, refer to the following.
MELSEC-Q/L Ethernet Interface Module User's Manual (Application)
(3) Web function
This function allows data to be read/written from/to a remote CPU module over the Internet using a Web browser.
For the function, refer to the following.
MELSEC-Q/L Ethernet Interface Module User's Manual (Web function)
IP address in use detection function
If different stations in the same network use the same IP
address, the address in use can be detected.
Page 192, Section 14.6
Alive check function
Whether a connected device is normally operating after a
connection is established (open process) can be checked.
Page 194, Section 14.7
Module error collection function
An error that has occurred in an E71 can be stored in the
CPU module as error history. The history data can be stored
on a memory with the backup power feature; therefore, error
details are held even if the CPU module is reset or the
system is powered off.
Page 241, Section 16.3
Function Description
E-mail function
Data are sent/received using an e-mail.
• Data sent/received by a CPU module
• Data sent using the programmable controller CPU monitoring function
(automatic notification function)
CC-Link IE Controller Network, CC-Link IE Field
Network, MELSECNET/H, MELSECNET/10 relay
communications
Data are communicated over multiple network systems where Ethernet and other
networks exist together or network systems that relay multiple Ethernet networks.
Communications using data link instructions
Data of a CPU module in other stations can be read/written over Ethernet using
data link instructions.
File transfer (FTP server) function
Data can be read/written in files from connected devices using an exclusive FTP
command.
Function Description Reference
To Next Page
Loading...
