341
APPENDICES
A
Appendix 8 Operation Image and Data Structure of Predefined Protocol
Appendix 8.1 Operation image of each communication type of protocol
(2) When the communication type is "Receive Only"
The receive process completes when the data received from a connected device match the receive packet
(expected packet). If they do not match, the data are discarded.
The operation image of "Receive Only" is as follows.
(a) When the instruction ends normally
Receive data 1
Receive data 2
DataHeader
Data
Data
Header
Receive packet
(expected packet)
E71
Not matched
Matched
Received
Sixteen receive packets
can be specified.
Connected
device
Discarded
E71
Connected device
ECPRTCL instruction
Completion device
Receive data
Receive data
Completion device + 1
The receive data matched
the receive packet
(expected packet).
To Next Page
Loading...
