Mitsubishi Electric Q170MSCPU-S1 - Forced Stop Input Cable

4 - 24
4 INSTALLATION AND WIRING
4.2.2 Forced stop input cable
(1) Precautions for handling the forced stop input cable
Firmly hold the forced stop input connector during connection or removal of the
forced stop input cable.
Motion controller
(2) Connection of the forced stop input cable
When connecting the forced stop input cable to the Motion controller, hold the
cable connector and attach it to the Motion controller forced stop input connector.
Be sure to insert it until it clicks.
(3) Removal of the forced stop input cable
When removing the forced stop input cable, firmly hold the connector while
pulling out the cable.
POINTS
The following handling will damage the Motion controller or forced stop input cable.
• Forced removal of the forced stop input cable from the CPU module.
• The forced stop input cable is twined to other cables.
• Excessive power is applied at cable laying.
Wire the cable correctly.