4 - 25
4 INSTALLATION AND WIRING
4.2.3 24VDC power supply cable
(1) Precautions for handling the 24VDC power supply cable
Firmly hold the 24VDC power supply connector during connection or removal of
the 24VDC power supply cable.
Motion controlle
(2) Connection of the 24VDC power supply cable
When connecting the 24VDC power supply cable to the Motion controller, hold
the cable connector and attach it to the Motion controller 24VDC power supply
connector. Be sure to insert it until it clicks.
(3) Removal of the 24VDC power supply cable
When removing the 24VDC power supply cable, firmly hold the connector while
pulling out the cable.
POINTS
Forced removal of the 24VDC power supply cable from the Motion controller will
damage the Motion controller or 24VDC power supply cable.
To Next Page
Loading...
